Compared with the plow and harrow farming industry, rotary cultivator has good performance, wide adaptability, high work efficiency etc.
The choice of rotary cultivator
Selection of rotary cultivator product model must adjust measures to local conditions, according to their own tractor and to determine the local natural conditions. Pay attention to look at the appearance quality of the products, such as paint or fall off, burr is clean.Conditional best working free will for a few minutes, listen to the voice if normal, if the bearing parts is overheating, if operation is flexible in position etc.
The usage of rotary cultivator
First to read product manual carefully before using and the safety of the machine on the logo, the potential risk of machines and tools to accomplish know fairly well, according to the instruction manual for the specific operation, the main points to avoid safety accident.Before operation ,we should to check if adding the lubricating oil of the transmission case of rotary cultivator, if adding foot grease for bearing ,the connecting bolt fastening.If the sound is unusual in the operation, we should immediately stop to check and troubleshooting.Walking tractor supporting ler in the car, it is forbidden to not stall people stand in front of the machine, lift machine.The machine should be shut down when passed through a high ridge .
The maintenance of the rotary cultivator
"Prevention is more important than treatment, keep focus on repairing" is the principle of rotary cultivator maintenance.Rotary cultivator can be divided into class maintenance and quarterly maintenance . General, the work should be done after class maintenance,
Maintenance include:
1．Pls check and tighten connection bolt.
2. Pls check bolt, cotter etc quick-wear parts.pls replace if need；
3．Pls check transmission box, 10 bytes and bearing if the lack of oil.
After each job quarter should be quarterly maintenance, including :
1. Completely clear the dust ,oil on the machine;
2．Completely replace the lubricating oil and grease;
3．Check the excessive wear of blades, if necessary, pls change new;
4．Check the hood, dragging plate is deformation or not, restore or change it if need.
5．If not use for long time,wheeled tractor matched rotary cultivator should be putted in level ground,should not be hang in tractor.
