How to correctly use the agricultural seeding machine------The usage method and matters need attention.
For your agricultural machinery safety, POUSSA company technical personnel summarize right to tackle the problem of seeding machine for reference.
I. Step 1 for seeding machine using---Prepare
1. Clean the sowing box and opener on winding grass, dirt, ensure the the seeding machine in good condition, check the transmission of tractor and machine, rotating parts, filling lubricating oil according to the requirement of the specifications, especially pay attention to the drive chain lubrication and tensioning situation and seeded on the bolt fastening.
2. When the seeder and tractor mounted, shall not tilt, should keep the frame in horizontal state before and after work.
3. According to the provisions of the operating manual and agronomic requirements, adjust the seeding rate, spacing of opener, furrowing suppress wheel turns the soil depth to the best state.
4. Choose the high quality seeds,ensure no small, immature, miscellaneous seed, to join the seed box, the quantity to add at least to cover the entrance of seed box to ensure the sowing fluent.
II.Step 2 for seeding machine using---Trial Planting
Trial planting 20 m, observe the seeding machine work,let the agricultural machinery personnel and farmers check and diagnostic , after confirmed that conform to the requirements of the local agricultural then large area planting.
III.Step 3 for seeding machine using---Planting
1. Drivers choose the good walking routes, should guarantee convenient for adding seeds and the tractor in and out of the land, must pay attention to the uniform motion in a straight line, not fast and slow or stop halfway, so as to avoid repeat planting or leaked sowing; To prevent opener obstruer, the rise or fall of seeder must operate in the walking, back or turn should lift the machine.
2. First cross seeding the edge of the field avoid rolling hard the land.
3. Often observed the metering device, opener, covering as well as the work of the drive mechanism , If there is congestion, clay, winding grass, seeds not covered tightly in a timely manner to be ruled out.Adjust, repair, lubrication, or clean up the winding grass etc, must be conducted after parking
4. When the seeding machine working, it is strictly prohibited to reverse or turn, the lifting or landing should slowly, so as not to damage the spare parts.
5. The seeds shall not be less than 1/5 of the seed box volume when the machine working.
6. Transportation or transfer land parcel, the seed box may not containing seeds, cannot be pressed more other heavy objects.
Whether you are master of agricultural machinery, using seeding machine for a long time, take a closer look at our experience summary, maybe helpful to your work!
